SDIM Subnet Configuration

To configure an SDIM Stands for ‘Serial DIMming communication’. It is a Helvar communication protocol. subnet A subnet is a part of a router. There are two or more subnets on each router. The subnet allows the flow of network traffic between hosts to be segregated, based on network configuration. By organising hosts into logical groups and joining them, subnetting, network security and performance can be improved. :

1. Click on the SDIM Subnet in the Devices View.

2. If the Properties for the subnet is not already open, select View > Properties, or press F4.

Configure Subnet

Name

It may be useful to name the subnet:

1. In the Common section, enter a name in the Name field.

2. Click . The subnet is renamed in the Devices view.

Related Topics

• SDIM Subnet

• SDIM Control Gear Configuration

• Insert an Item

• Devices View

• Properties

• Workgroups

• Addresses