Sensors
|
|
Sensors |
|
In this Topic Hide
317 High Bay PIR Absence / Presence Detector
318 Wall-Mounted PIR Detector (with control button)
441 Occupancy Detector Interface
313 Low-Profile Microwave Detector
Designer can be used to configure the following Helvar sensors, including microwave, PIR and light sensors. There are also multisensors.
The 311 is a flush-mounted ceiling unit that provides energy-saving functions when used in a DALI system.
It also an infrared remote control receiver that allows for operation by the Helvar Remote Control Handset.
The 312 contains a Light Sensor, a PIR movement detector and an infrared remote control receiver that allows the multisensor to be operated by the Helvar Remote Control Handset. .
The iDim Sense is a luminaire-based DALI sensor. It combines a PIR movement detector, infrared remote control receiver and photocell (CL) in one enclosure, and a manual mode selector that allows you to easily select one of the 6 out-of-box application modes.
The 317, as part of a Helvar lighting control system, provides automatic control of lighting loads in buildings and interior spaces with high ceilings.
It also an infrared remote control receiver that allows for operation by the Helvar Remote Control Handset.
The 318, used in conjunction with a Helvar lighting control system, provides automatic control of lighting loads in individual room spaces. As well as the PIR sensor, the 318 has a touch control button that allows manual override of the lighting on/off, and light level adjustment if dimmable lighting is being controlled.
It also an infrared remote control receiver that allows for operation by the Helvar Remote Control Handset.
The 441 Occupancy Detector Interface allows connection of a customer specified occupancy sensor to a DIGIDIM-DALI system. The input accepts a volt free normally closed contact.
The 313 provides energy-saving functions when used in a DALI system.
It also an infrared remote control receiver that allows for operation by the Helvar Remote Control Handset.
The 314 provides energy-saving functions when used in a DALI system. It has an adjustable sensor head that allows the area of detection to be optimized for each particular installation.
It also an infrared remote control receiver that allows for operation by the Helvar Remote Control Handset.
The 312 contains a Light Sensor, a PIR movement detector and an infrared remote control receiver that allows the multisensor to be operated by the Helvar Remote Control Handset.
The light sensor allows the 312 to be used to control general lighting levels, and to be used as part of a constant light control system.
The 329 DALI External Light Sensor enables Open Loop Constant Light Control.
Mounted outdoors, the information that it gathers can be used to control general lighting levels.
The 329 can be used to control general lighting levels, and to be used as part of an open loop constant light control system.
See Control Device Configuration
See Information on Multisensors is listed
in a separate section.